iBluever
This post is also available in: Chinese (Simplified)
iBluever is an iOS application which enables Bluetooth Dial-up networking support (client mode) for your iPad, iPhone and iPod Touch. iBluever has its owner Bluetooth and network stacks, you can connect your iPad/iPod Touch/iPhone to a Bluetooth Dial-up networking enabled phone, and then access the mobile network via the phone’s connection.
NOTE: If you are going to share your iPhone’s connection to other iOS devices such as iPod Touch/iPad/iPhone, please try iTether instead.
NOTE: There is a demo version of iBluever, please be sure to try to demo to make sure that your phone is compatible with iBluever prior to buying.
- It uses the low power Bluetooth wireless technology. The blued daemon used in iBluever supports automatically switch to low power mode when the connection is not so busy
- You can connect/disconnect iBluever connection from within the application.
- You can connect/disconnect iBluever connection from SBSettings toggle with one tap.
- You can connect/disconnect iBluever connection from Activator with a even simper gesture.
- Automatically start iBluever connection when screen is unlock and WiFi is not associated, will disconnect when WiFi is available or screen looks.
- It support iPod touch 2G/3G/4G, all iPhones and iPads.
- Generic Bluetooth DUN(Dial up networking) support, if your phone(Nokia phones, Android phones with PDANet, Blackberry phones and etc) supports this profile, you can use iBluever to use your phone’s mobile connection.
- Modem scripts support for a wide range of phones.
- Bluetooth serial port is supported as well, you can share your Mac/PC’s connection to your iDevices
- Custom DNS support
- Data usage statistic
- Proxy support
- Free life time upgrades
Auto start when screen unlock while WiFi is unavailable
Auto stop when WiFi detected
Connection inspector
Settings 2
Select device vendor
Select connection type
DNS configuration
Proxy configuration
Beside Dial-up Networking service, able to connect serial port services
If you need support on this app, Please mail the developer from within the iBluever app. Comments here may not be replied.
| anyShare分享到： | |
|
|
My ipad does not recognize my Blackberry, what could be going on? Bluetooth turned on, etc etc.
Oh whatever, fixed it already. Connected and stuff, but can’t seem to browse websites now, argh.
Since I installed Celeste I cannot use ibluever!
Can someone help me??
Remove the bluetooth pairing on your phone
I keep getting ppp error. I require Account Name and Password to be blank, but they keep repopulating with the default ‘user’ and ‘***’. I suspect this is what is causing the error. Please help!
Hey Eric,
I JB my Ipad 2 using jailbreakme.com. Im trying to get my blackberry bold 9700 connected to my ipad 2 via iBluever. Sometimes I do get a connection and the 3G internet works perfectly. But most of the time it’s not connecting and I get the error that it cant connect to the PPP-server.
Thanks!
Send me the logs please
I purchased, downloaded and installed iBluever. Worked perfectly for 1 day. The next I saw the app was not arround. I tried reinstalling and got the following problems:
“subprocess post-installation script returned error exit status 255″
“dependency problems -leaving unconfigured”
and “sub-process / usr/bin/dpkg returned an error code (1)”…
Why is this? and, What can I do to repair this?
Why it disappeared?
Can you please copy the output in cydia installation screen and send it to me so that I can know what error you get
Hi ism try the demo and works fine, y ready buy the full versión dont work i have the iPad 2 my so is 4.3.3, my question is the demo vercion how make a full versión ? The full vercion dont work for me pls help me
I installed ibluever on my 32GB 3G iPad2. When activating the software, I got the error “payment 672359 is in the blacklist as too many devices activated” I have installed iBluever on 3 devices with a few re-installations on each device. Did I reach the limit? Please suggest me how to solve the problem.
Thank you.
Anat
Ok, all these devices have been removed from the blacklist.
Awesome. Awesome. Awesome. Did exactly what I was hoping it would do. Blackberry storm 2 w/ Verizon Wireless. I am doing a happy dance now. Possibly the best $5 I’ve spent all year. Keep up the good work
Hi, I”ve tried iBluever demo and worked fine with this settings:
(i have a blackberry with movistar in Uruguay)
access point: 0000
Dial number: *99#
Chat script: Default Non GPRS
Autentication: ON
Wait for SDP: ON
Now I’ve purchased the iBluever w/on demand and I can’t get a connection and don’t know how to put the same settings.
Can you please help me???
I have exactly the same problem. The User interface of the demo version is completely different to the full version. Demo Version worked, Full version does not work. Did you get any help? I am very disappointed!
Regards
Viktor
send me the logs if you can not setup a connection
Hello,
I would like to use my iPhone as gateway via bluetooth DUN profile, because almost car navigation system (GPS) supports Bluetooth DUN only in japan.
Do you have plans to support Bluetooth DUN-GW on iBluever?
Are there any reason for unsupporting Bluetooth DUN-GW?
Any plans to implement SPP support? I have a Philips X806, and it haven’t DUN profile
(((
iBluever supports SPP
Hi,
I installed the demo version and selected default empty. Connexion has been done between my ipad2 and my torch, but i still not connected to internet. Could you please help me as I may missed the step after.
Thanks
I do not think you need the empty script
I bought iBluever at Cydia.
But I can’t install it.
My iPod touch say
I wasn’t abele to locate file for the
com.ericday.erichooks package. This might mean
you need to manually fix this package.
please send me any information.
Yasuhiko Hamada
I succes install iBluever.
(Once logout Cydia)
That’s great. Cydia is not so stable
Also, can I transfer my purchase when I upgrade my devices later on?
Cydia allows you link the new device in.
I’ve got a jailbroken wifi only ipad1 (4.3.5), i’ve installed the demo ibluever to test first before i purchase, and the screen is stuck on the “retrieving daemon state” message.
I’ve googled the problem and read thru this forum and tried suggested remedies, like completely removing ibluever and re-installing. i went as far as restoring my ipad to it’s original unjailbroken status, then repeated the whole process from scratch. can u please help me.
Are you able to use MobileTerminal on your device? If so you can help me to test
Hello,
Any updates on getting my account reset so I am not blacklisted? I really need to get my new iphone hooked up to ibluever…
772511
Thanks
Brandon
I am trying to find out how to connect de my iPhone 3GS iOS 4.3.3 internet connection with my Galaxy Tab GT-P1010 (wifi only) so I can use the tablet in places without wifi. Will this app do it? What do I need on my Galaxy Tab?
Thanks in advance.
Sorry, iBluever can not do that
Hi, I’m getting a notice that Activation Failed, “payment 3032193 is in the blacklist as too many devices activated”.
I’ve switched from an iPhone 4 (which I have replaced under AppleCare several times) and then to an iPod touch 3G (also replaced once under AppleCare) as my new job does not allow camera phones.
Is there anything you can do to unblock my payment? Thank you!
Mail me please
Hey Eric, Is it possible to implement a little toggle so that instead of it displaying the 3g icon it’ll display the Edge/2G icon, as occasionally i connect to one of my friends phones which doesn’t have 3g, Other than that, Beautiful Program, made me stop regretting not buying a 3g enabled iTouch
Is ibluever iOS 5 compatible ?
I have tested ibluever on iOS 5 GM using an iPhone 3gs and it does not work. After install the phone stays in “Safe Mode”
Als, the iphone will not see any devices when searching for bluetooth.
Thanks
I bluever wasn’t working with iOS 5 GM before today. Some cydia updates were released today(possibly due to iOS official release today?) and ibluever is now working with iOS 5 GM.
Thanks
WhAt about ios 5? I am using ibluever for 4.2. Is it safe to upgrade to 5.0? You know… Wireless sync is a good call
Does iBluever work with the new iOS 5?
what about iOS 5 compatibility?
will this work with nokia c2-01 ?
coz ipod inbuilt bluetooth tether is pretty hopeless
Hi, I’m trying to tether my ipad 2 to my Blackberry Bold 9780 w iBluever. But can’t figure out the Access Point Dial Number Account PW info bit. I’ve tried *99#, on Default, Default GPRS etc but nothing seems to be working. Can’t get a connection. I’m in Canada and my carrier is Bell, if that makes a difference. Help!
Hi I am trying to use this software to create a data connection between my TomTom and my iPhone 3GS. However it does not seem to advertise the DUN service on my iPhone and therefore my TomTom cannot find it when doing a search via Bluetooth. If this could work then there are a lot of iPhone/TomTom users that would be interested as people have been looking for a fix for years.
What do I have to do to use my PCs networkconnection via iBluever on my iPod?
I get pppserial error 5 and pppserail error 7
i just bought the latest ibluever v2.0.59 and its not working, i am keep getting the PPP connection error. it was working on the demo version. please help i have the blackberry 9330 with PDAnet DUN enabled on sprint .
thanks
Are there any plans to have this iBluever application on Android tablet? I have a ASUS Transformer and can’t get it to do bluetooth DUN to my BlackBerry Curve but my Dell/Win7 laptop can use the internet connection from my bluetooth DUN on the BlackBerry Curve. I would love mobile internet on my Andriod Laptop!
Can I use Ibluever on NON jail breaked Ipod Touch 4G?
hi, I have problems starting the iBluever. When I open the app, I get a message “Failed to connect to daemon”. I wonder if anyone can help me. thank you
Cydia has removed iBluever! Where can I download it now? I’ve updated to iOS 5.0.1 and need to get it back on my iPod touch 4G
Hi eric, i have same problem with blacklist, could you please help, need it badly on my touch 4g.@eric
it used to work very well but two or three months ago it is updated or something like that and from that time it is NOT WORKING with my nokia device. What are the settings please give a DETAILED information.
Hi, I use blackcerry torch9810 and my device is ipadII wifi. If I use my blackberry as a device to share my internet to my ipadII will it also become 3G speed? Thanks for answering my question.
Hi Eric, could you please please please delete my payment from blacklist i I can activate ibluever again on my update ipod touch, i have only installed it 2 times on the same device.
2386379
Come on guys, the only app that won’t activate after updating my device is the app I acctually paid for, ibluever, get message blacklisted. I only activated it on 2 devices, my ipad and my ipod. I am waiting a long time now for respond, and I sended around 10 messages now, could you please unblacklist my purchase, so I can activate ibluever again. Really need it.
2386379
Hello, I purchased this app from Cydia and when I try to install I get the message:
” I wasn´t able to locate file for the com.ericday.erichooks package. This might mean you need to manually fix this package”
And cannot install…………….
Hey brother, I cannot find your app in the new Cydia, is it still there, renamed, or ?
thanks
Hey brother, Ignore that request…Influenza slow the grey matter down….I found it I had to add the repo…dam flu.
Love ya bro
I have been running the latest version of Ibluver /On Demand for months and now, for some reason, it won’t connect properly:
1. Ipad2
2. ios 4.33
3. SE TM506
A. When I search for more devices the app spins and finds nothing. When I do this with my ipod touch running ios 5.01 (side by side with ipad2) it finds all the BT devices in the vicinity.
B. ipod touch 4th Gen running 5.1 is working fine with Ibluever w/on Demand
B. I have tried uninstalling and reinstalling from cydia several times. Each time I do it all the previous devices remain in the configuration file.
I. How can I remove ALL of Ibluver including the configuration files so that I can do a completely clean reinstall?
II. any other insights regarding this issue?
Eric–final note- still having license issues with my OTHER ipod touch 4th gen (I’ve emailed you about this)
Hi Eric,
I’ve just bought a new iPod Touch 4G, and when I try to activate my copy of iBluever, it says “payment 3959616 is in the blacklist as too many devices activated”. As far as I know, my iPad 1, the other iPod Touch 3G and my old iPhone 2G (FYI iBluever doesn’t work on it) have iBluever activated.
Would you please remove me from the blacklist?
Thanks.
@Norbert White
All the problems have been solved and they were result of my own stupidity.
1. It turns out that all I needed to do was remove AirBlue and reinstall.
2. My licensing issues are associated with another application (RoqyBT)
Sorry for the confusion.
Hi
I used ibluever ver 2.0.59 on ios5.0.1.For Nokia E52 this works perfectly.
But for ht02a(htc touch diamond) wm6.1,WM6_BT_DUN.cab installed doesn’t work.
Connecting from Windows XP and Other WM6.1 to WM6 works fine.
For WM6 ibluever fails at bluetooth passkey exchange.
I input 0000 on ibluever,next I input same 0000 on WM6.1,but fail,device not registered.It seems ibluever timing is too fast.
Is there any parameter about passkey ?